

The operator's publication for non-emergency medical transportation. State licensing guides, broker intel, a 2,000+ provider directory and The Dispatch, our weekly newsletter.
Private-pay NEMT rides are priced in three parts: a base fare for each leg, a rate for each mile the rider is in the vehicle, and a charge for time spent waiting. The right numbers for your company come from what each ride costs you to run, including the miles you drive empty, not from what the company across town charges. Below: how the three parts work, how to build them from your own costs, the charges most new operators forget, and what families should ask before they book. Our free private-pay rate calculator does the math for you.
Most private-pay rate cards use the same structure, so riders and facilities can compare quotes:
| Charge | What it pays for | How it's usually billed |
|---|---|---|
| Base fare | The cost of showing up: your share of insurance, the vehicle, your phone and software, plus loading and unloading time | Flat amount per leg. A round trip is two legs. |
| Per-mile rate | Fuel, maintenance and your driving time, for both the loaded miles and the empty miles to and from the ride | Charged on loaded miles only, so the empty miles have to be built into the rate |
| Wait time | The driver's time while the rider is in an appointment | Per 15 or 30 minutes, often after a free grace period |
On top of those three, most operators publish a short list of fees: a cancellation or no-show fee, a minimum fare, after-hours or weekend rates, and a charge for extra stops. Level of service changes the whole card. Wheelchair and stretcher rides need a different vehicle, more time and often a second person, so they carry their own rates.
If you also take Medicaid trips, the rate for those is set by the state fee schedule or your broker or managed care contract. You don't negotiate it ride by ride, and it was not built around your costs. Private-pay riders, families and facilities pay your own rates, so set them from your own numbers. If you are weighing broker work at all, the NEMT broker report card covers how the major brokers pay.
The worked example below uses one ambulatory car doing 20 paid rides a week, 50 weeks a year. Swap in your own numbers in the calculator.
These are the bills you pay whether you run one ride or a hundred: insurance, the vehicle payment or what the vehicle loses in value each year, phone, software, marketing, licenses and permits. In the example they total $13,600 a year. Spread over 1,000 rides, that's $13.60 a ride.
Insurance is usually the biggest line and the one new operators guess low. Get real quotes before you set prices. Our NEMT insurance guide covers what each policy costs and why.
Divide your fuel price by your real-world miles per gallon, then add maintenance and tires. At $3.50 a gallon, 24 mpg and $0.12 a mile for maintenance, every mile costs about $0.27.
This is where most private-pay rate cards lose money. You drive to the pickup and back home empty, and nobody pays for those miles unless your rate does. In the example, every 10 loaded miles come with 8 empty ones, so a 15-mile ride means 27 miles of driving.
In rural areas it's often worse. A 40-mile ride to a city hospital usually means 40 empty miles home.
Driving, loading, unloading and waiting are all work. Price your time at an hourly rate, whether you drive yourself or pay a driver. At $28 an hour, 35 mph average and 15 minutes to load and unload, the time on that 15-mile ride costs $28.60.
Add it up and the ride costs $49.38 to run: $13.60 fixed, $7.18 fuel and maintenance, $28.60 time. That is your break-even. Anything less, and you're paying the rider to ride.
Your pay is a cost. Profit is what the business keeps on top of it, for repairs, slow months and the next vehicle. With a 20% margin, the example works out to:
| Base fare | Per loaded mile | Wait, per 30 min | Typical 15-mile ride |
|---|---|---|---|
| $26 | $2.40 | $18 | $62.00 |
At that volume the business clears about $12,600 a year after paying the owner. Change any input and the card changes with it. The cost-per-trip calculator goes deeper on fleet costs, and our NEMT earnings model shows how the numbers scale past one vehicle.
Take a common starter rate card: a $30 base fare and $2 a mile. On a 15-mile ride in town, it brings in $60, which covers the example's $49.38 cost with room to spare.
Now run the same car on a 40-mile one-way ride into a city hospital, driving the full 40 miles home empty at an average of 35 mph with traffic. That's 80 miles and more than two and a half hours of work, and it costs about $105.87 to run. The $30 plus $2 card brings in $110. The margin drops from about 18% to under 4%, and one traffic jam on the way home erases it. The calculator's rate card for that trip pattern is a $26 base and $2.70 a mile, which brings in $134.
Most of the gap isn't fuel. It's time: every empty mile is a mile you're on the clock with nobody paying.
Two fixes work better than raising every rate:
A two-hour appointment is two hours you can't run another ride. A wait rate of $15 per 30 minutes is $30 an hour, which barely covers a driver's wage and leaves nothing for the business. Price waiting at your hourly rate plus margin, give a short free grace period (15 minutes is common), and bill in clear blocks. If the appointment runs long enough that you could leave and come back, say how that's billed.
Before you publish prices, check whether your city regulates vehicle-for-hire fares or requires a permit. Our state licensing guides, starting with the NEMT licensing by state overview, cover where to look.
If you're paying for a ride yourself, the cheapest quote isn't always the cheapest ride. Ask:
Put any quote into the calculator's "Price a ride" tab to see the full cost of the trip, including waiting. To compare providers near you, search the NEMTrepreneur provider directory.
Most charge a base fare for each leg, a per-mile rate for the miles the rider is in the vehicle, and a wait-time charge billed in 15- or 30-minute blocks. Many add a minimum fare, a cancellation fee and after-hours rates. Wheelchair and stretcher rides are priced separately.
It depends on the distance, whether it's one way or round trip, how long the driver waits, and the level of service. A round trip with a long appointment costs far more than a short one-way ride. To see the full cost of a specific ride, enter the provider's rate card and the trip details in our rate calculator.
Medicaid rates are set by the state or by a broker or managed care contract, and they apply to Medicaid members. Private-pay rates are set by each company from its own costs. The two are separate, and Medicaid rates are not a floor or ceiling for private pay.
One that covers your fuel, maintenance and driving time for every mile you drive, including the empty miles to and from each ride, plus your profit margin. Because empty miles vary so much between a city and a rural area, two companies with the same vehicle can need very different per-mile rates.
The NEMT Entrepreneur directory lists 2,000+ non-emergency medical transportation providers by state, city and service type.

